Self Curing Ready Mix Plaster
4.5/5
Packaging: 50 Kg Bag
A Specially formulated Cement Based Polymer Modified Plaster, used for both Internal and External walls; and is a perfect replacement of conventional site-mixed cement/sand plaster. This Plaster does not require any curing post application. High Quality processed, graded Sand is used. The Sand used is a biproduct of Steel Industry and it is free from clay, sulphates and organic materials.
METHOD OF USAGE
PRE-APPLICATION PROCESS:
- Place the required amount of Dry-Mix Wall Plaster into a mixer or onto a non-absorbent surface.
- Add potable water gradually ensuring that it does not wash away any cement and mix thoroughly to ensure an even and consistent mix.
- Surface must be free of dust /loose particles, grease, mold, oil, rust metal, wood peels, paints and plastics.
- Pre-wetting of substrate: Surface must be dampened / moistened before the application of Plaster. Ensure there is no stagnant or frequent water flow on substrate while applying the plaster.
- The material should be applied within 2 hours of preparation. The Plaster can be applied by hand or spraying machine to the required thickness. For spray application approx. 22-24% of water is required, by weight of dry material. Product is designed in a such way that; it can be applied even up to 20mm thick in a single coat.
- All tools and equipment should be cleaned with water after use.
- Do not re-temper the mortar if it stiffens. Discard the stiffened product and make a new mortar.
ADVANTAGES:
- 53 Grade Cement Based, Polymer Modified, Pre-Mixed Plaster
- Compact Plaster, Reduces Void Gaps
- Imparts High Coverage
- Highly Water Resistant
- No Water Curing Required
- Prevents Seepages & Water Percolation
- No Shrinkage or Cracks
- Excellent Bonding & Better Levelling
- Excellent Smooth Finish
- Reduces Paint Consumption
- Paint can be applied just after 2 days
- Protect expensive Paints from flaking dampening & peeling
- Durable & Long-Lasting Performance
- Cost-Effective & Time-Saving: Saves additional time required for curing
- Water conservation: Water is saved and even the process for curing is eliminated
- Effortless masonry: Costs incurred for Curing process is saved, especially for high rise structures
- Overall bonding properties are enhanced
- Strong & Durable with good adhesion to all surfaces
TIPS:
- Add only enough water to make a workable mix, and do not add excessive water as this will weaken the Dry-Mix Wall Plaster.
- The recommended amount of water should be added to ensure that the plaster is moist enough to bond to the wall surface, but not so wet that it sags or runs down.
Key Features
- Designed to meet the exact needs of masonry work
- Ready to use product; just requiring the addition of clean water
- Quality premixed product specifically formulated for plastering applications
- Excellent workability
- Designed to ensure smooth finish
- This Wall Plaster mix is designed to retain moisture to assist natural hydration process especially at warm to hot temperature
Benefits
- Sarwinplast Self-Curing Ready-Mix Plaster is a high-quality Premixed plaster suitable for Clay/Fly Ash brick wall, AAC block wall and Concrete surfaces. Its premixed with polymer chemicals which are non- staining, non-toxic, aqueous solutions.
- This premixed plaster when applied to fresh concrete surfaces, seals the pores, thus reducing the evaporation of water from the mix which assist curing process.
- It effectively seals in moisture to facilitate complete hydration of cement, resulting in maximum strength, increases durability, greater wear resistance and minimum surface dusting.
APPLICATION SURFACE:
Sarwinplast Self-Curing Ready Mix Plaster is suitable for:
External plastering, Interior plastering, General plaster applications.
